Hello dear visitor! Glad to see you in our store. Good luck with shopping

All Categories

  • All Categories
  • Accessories
  • Coils & Pods
  • E-Liquid & Juices
  • Kits & Devices
  • Mods & Batteries
  • New Vapes
  • Sale items
  • Tanks

Innokin Sensis Pod Mod Kit UK

  • £39.19
  • Ex Tax: £39.19
  • Product Code: M00002443
  • Availability: In Stock

INNOKIN SENSIS POD MOD KITPlease note: Pods are 2ml capacity, as per TPD regulations.The Innokin Sensis Pod Mod kit is a pod mod device that features next-gen vape technology inside, which extends coil life and boosts flavour. Ranging from 6-40 watts, this pod kit uses the upgraded 0.25 ohm S-Coil and Sceptre coils, which allow for excellent MTL and RDL vaping..

Available Options

INNOKIN SENSIS POD MOD KIT

Please note: Pods are 2ml capacity, as per TPD regulations.

The Innokin Sensis Pod Mod kit is a pod mod device that features next-gen vape technology inside, which extends coil life and boosts flavour. Ranging from 6-40 watts, this pod kit uses the upgraded 0.25 ohm S-Coil and Sceptre coils, which allow for excellent MTL and RDL vaping.



Coil+ Mode

The Coil+ mode can be activated to automatically prime the coil at the end of each puff by drawing in more liquid and reducing the amount of carbon on the coil. Coil+ does this by running at 40% of your chosen wattage for 0.4 seconds at the end of each puff. This creates a more flavour-rich draw, guaranteed to satisfy.



Refresh

The Refresh feature allows you to manually refresh the coil between hits for better wicking, which brings the flavour through and extends the coil life. Similarly to the Coil+ mode, Refresh does this by running at 40% of the set wattage.



Find F

As the new generation of vape technology, Find F produces a waveform output at the selected frequency. Find F does this by creating and harnessing a new form of thermodynamic heating, which increases the coil life and delivers higher quality flavour. The best Find F frequency is highly dependant on the coil used and e-liquid used. Explore the Find F function and the best frequency for your vape.



Glass

The new glass pod improves the flavour and protects the pod from possible corrosion when using certain e-liquids, in comparison to plastic pods.



Airflow

The Sensis Pod Kit has an adjustable airflow, located below the glass pod, which can be tailored to your preference.



Sceptre S Coils

Sensis is compatible with the Innokin Sceptre Coil and a new, upgraded Sceptre S Coil. The Sceptre S coil has a resistance of 0.25 ohms, runs best between 25 and 35 watts, is capable of more power and allows for superb RDL vaping.



Battery & Charging

A large 3000 mAh battery is built into the stylish and compact Sensis kit, helping it last throughout the whole day. The USB Type-C port allows for faster and safer charging.



100% Recyclable Packaging

The Innokin Sensis Pod Mod kit packaging is 100% recyclable.



Specifications

Product name: Sensis | Tank capacity: 2ml | Wattage range: 6-40 watts | Battery capacity: 3000 mAh
How to fill: Bottom filling | Coil material: KAL & Seaweed fibre cotton
Voltage range: 1-7.5 volts | Cut off time: 3-18 seconds | Body material: Zinc Alloy
Resistance range: 0.2 ohms - 3.5 ohms | Max. output current: 20A

Dimensions with pod: 120.35 mm x 39.51 mm x 30.0 mm
Dimensions without pod: 93.5mm x 39.51 mm x 30.0 mm



To avoid premature coil failure, be sure to follow our coil priming guide.

Depending on how many cigarettes you smoke, we recommend the following strength e-liquids with this kit:
1 to 5 Cigarettes a day - Choose 3mg of traditional nicotine
6 to 14 Cigarettes a day - Choose 6mg traditional nicotine or 10mg Nic Salt
15+ Cigarettes a day - Choose 12mg traditional nicotine or 20mg Nic Salt
Not sure what Nic Salts are? See our guide here

Write a review

Note: HTML is not translated!
    Bad           Good